Wegener Communications 6400 Benutzerhandbuch

8000009-03 Rev. A

4

Professional Video

Professional Video

9

800009-03 Rev. A

Y our LAN line to the iPump's Ethernet port (

d) [10/100baseT;

female RJ-45 connector]

The Alarm port (

e, Figure 1) on the rear panel may be used to

provide a contact closure during alarm conditions or on

command from Compel. See the iPump User’s Manual for
complete connector and signal details.

Note: Do not connect devices to the mouse, keyboard and other

connectors not described here. They are for factory use only.

GREEN constant

Current transport stream is protected by

conditional access (CA) and iPump is

authorized and descrambling.

GREEN  slow blink

Current transport stream is protected by

conditional access (CA) but iPump is

unauthorized.

Off

Tracked channel is not scrambled ("in the

clear").

AMBER constant

One or more warning conditions exist. Read
warning information from front-panel LCD.

Off

No warning conditions exist.

RED constant

One or more alarm conditions exist. Read alarm

message from LCD.

Off

No alarm condition exists

 Only one alarm or warning condition is displayed at a time on the LCD. When

multiple alarm or warning conditions exist, those conditions are displayed in the

order of importance. The most critical condition is displayed first and others may be

viewed by pressing the right arrow button w

.

7.  Set up or adjust your 

iPump's RF settings at the front

panel. (If your unit has the optional ASI input, this step is not

necessary - go to step 

). From the home screen, navigate to the

 screen as follows:

Note: Use the arrow buttons to move left and right through the

menu screens and the 

 button to move down a level.

Use the 

 button to move upward through the menu

screens. By pressing 

 repeatedly, you can always return

to the 

 home screen.