Z Microsystems 19 Benutzerhandbuch

Doc# 27-0023UM Rev 1.0 Issued  09/04

9

Pull the two Console slides 
out until they lock.

Hold the Console by each 
side, with the front toward 
you. 

Feed the four cables com-
ing out of the Console back 
through the cabinet frame. 

Guide the Console into the 
slides and slide the Con-
sole in until it stops.

Simultaneously press in 
the catches on each slide 
and slide the Console all 
the way into the cabinet 
frame.

The Console should slide 
in and out easily. 

Slide the Console in and 
out several times. 

The Console should easily 
close completely.

To be sure the slide and 
mount assembly are 
aligned properly, slide the 
Console in and out several 
times.

If the Console binds during 
sliding, do the following:

Because of variances in 
cabinet frames, there may 
need to be some adjust-
ments of the Console slide 
system for best fi t and 
movement of the Console 
in and out.