VIZIO TL-WR641G Benutzerhandbuch

 

 

- 11 - 

 

Figure 3-8 

)

The IP parameters should have been provided by your ISP. 

¾

  IP Address - This is the WAN IP address as seen by external users on the Internet 

(including your ISP). Enter the IP address into the field. 

¾

  Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually 

255.255.255.0 

¾

  Default Gateway - Enter the gateway IP address into the box if required. 

¾

  Primary

 

DNS - Enter the DNS Server IP address into the boxes if required. 

¾

  Secondary DNS - If your ISP provides another DNS server, enter it into this field. 

After you complete the above, click Next, the Wireless settings page will appear, shown in 
Figure 3-9. 

 

Figure 3-9 

In this page, you can configure the following wireless parameters: 

¾

  Wireless Radio - Indicates whether the Access Point feature of the router is enabled or 

disabled. If disabled, the WLAN LED on the front panel will not be lit and the wireless 

stations will not be able to access the router. If enabled, the WLAN LED will be lit up and 

wireless stations will be able to access the router. 

¾

  SSID - Enter a value of up to 32 characters. The same SSID must be assigned to all 

wireless devices on your network. The default SSID is TP-LINK. This value is 

case-sensitive. For example, TP-LINK is NOT the same as tp-link.