Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Vanguard Managed Solutions
  4. Vanguard 7300 Series
  5. Benutzerhandbuch

Vanguard Managed Solutions Vanguard 7300 Series Benutzerhandbuch

Download
Seite von 227
5-12 
Modifying Your Vanguard 7300
Removing and Replacing the CPU Card and CPU Mezzanine Card (PMC)
Removing and Replacing the MPC750 CPU Card
Removing the 
MPC750 CPU Card
The Vanguard 7300 MPC750 CPU card is illustrated in Figure 5-7. Use the steps in 
this table to remove the CPU card from the Vanguard 7300 enclosure:
Figure 5-7. Vanguard 7300 MPC750 CPU Card with Pre-Installed 
Memory PMC
Note
The Release 6.4 and greater IBM750FX CPU card has On-board memory. The 
Pre-installed Memory PMC is not required.
Step
Action
1
Power off the Vanguard 7300.
2
Disconnect any cables attached to the front of the CPU card.
3
Using a screwdriver, loosen the captive screws from the front of the CPU 
card.
4
To eject the CPU card, press the ejector levers outward simultaneously.
5
Pull the CPU card from the enclosure.
Pre-installed 
Memory PMC
Flash Memory
CPU Card Serial 
No. Location