Vanguard Managed Solutions Vanguard 7300 Series Benutzerhandbuch
2-14
Vanguard 7300 Enclosures and Components
Vanguard 7300 Cards
CPU Board Layout
Figure 2-9 shows the layout of the Vanguard 7300 Series CPU card. Note that there
is room on the CPU card beside the Memory PMC for installing the two-port
Ethernet PMC (described in Chapter 5).
is room on the CPU card beside the Memory PMC for installing the two-port
Ethernet PMC (described in Chapter 5).
Figure 2-9. Vanguard 7300 Series CPU Card, MPC750
CPU Card
Installation
Information
Installation
Information
The MPC750 CPU card must reside in the system slot of Vanguard 7300 Series
products. Slot 1 is the system slot on Vanguard 7300 Series routers. Only one CPU
card can be installed in a Vanguard 7300. Refer to “Removing and Replacing the
CPU Card and CPU Mezzanine Card (PMC)” section on page 5-11 for CPU card
installation instructions.
products. Slot 1 is the system slot on Vanguard 7300 Series routers. Only one CPU
card can be installed in a Vanguard 7300. Refer to “Removing and Replacing the
CPU Card and CPU Mezzanine Card (PMC)” section on page 5-11 for CPU card
installation instructions.
PCI Mezzanine
Card (PMC)
Support
Card (PMC)
Support
The MPC750 CPU card provides one slot for installation of a 2-port 10/100BaseT
Ethernet PMC in the available PMC slot.
Ethernet PMC in the available PMC slot.
Front Panel
The MPC750 CPU card front panel (Figure 2-10) provides access to the Ethernet
port, CTP port, and PMC connectors. The front panel also provides four indicator
LEDs.
port, CTP port, and PMC connectors. The front panel also provides four indicator
LEDs.
Pre-installed
Memory PMC
Flash Memory
CPU Card Serial
No. Location