Utica Boilers UB90-100 Installationsanweisungen

 P/N 240010144, Rev. A  [05/2013]

1.  Follow instructions to TURN OFF GAS TO 

APPLIANCE found on Operating Instructions 

label on boiler or in Installation, Operation & 

Maintenance Manual.  Verify all electrical power to 

boiler is turned off.

Electric shock hazard. Turn OFF electrical power 

supply at service panel.

 

2.  Remove front and top jacket panel(s). 

Burn hazard.  Verify heat exchanger has cooled or 

use appropriate personal protection equipment.

  

3.  Inspect combustion chamber through sight glass. 

Verify fl ame is not present. See fi gure 1.

4.  Disconnect wires at: 

A.  Casting temperature switch. See fi gure 1.

B. Gas Valve

C.  Igniter ground and ground wire

D.  Inducer Temperature Switch. See fi gure 2.

Kit installation shall be completed by qualifi ed agency.

Fire, explosion, asphyxiation and electrical shock 

hazard.  Improper installation could result in 

death or serious injury.  Read these instructions 

and understand all requirements, including 

requirements of authority having jurisdiction, 

before beginning installation.  Installation is not 

complete until appliance operation is verifi ed per 

Installation, Operation & Maintenance Manual 

provided with boiler.

  

Sight Glass