XiNCOM Twin WAN XC-DPG503 Benutzerhandbuch

Physical Details

WAN1 LINK/ACT & 10M/100M LEDs flash alternatively.

Firmware Download in progress.

WAN1 LINK/ACT & 10M/100M LEDs flash concurrently.

MAC address not assigned.

WAN1 LINK/ACT & 10M/100M LEDs solid On

SDRAM error

WAN2 LINK/ACT & 10M/100M LEDs solid On

Timer/Interrupt error

LAN1 LINK/ACT & 10M/100M LEDs solid On

LAN/WAN error

Rear Panel:

Connect the primary Broadband Modem to 

WAN 1 and the second Broadband Modem 

on WAN 2.

Connect the PCs to these ports. Both 10BaseT and 

100BaseT connections can be used simultaneously.

Note: Any port will automatically operate as an “Uplink” port if 

required. Use a standard RJ-45 Ethernet cable to connect to 

any port to another hub or switch.

Press the Reset button once for a warm 

reboot.  To reset the XC-DPG503 to default 

settings, press and hold the reset button for 

30 seconds.

When the XC-DPG503 has finished booting, all configuration settings will be set to the factory defaults, including:

• The IP Address is set to its default value of 192.168.1.1 with a Network Mask of 255.255.255.0

• DHCP Server is enabled

• User Name: admin

• Password cleared (no password)

8