XiNCOM Twin WAN XC-DPG503 Benutzerhandbuch
Chapter 2 - Basic Setup
Overview
Basic setup of your XC-DPG503 wil involve the following steps:
1. Connect the XC-DPG503 to one (1) PC and configure it to your existing LAN.
2. Connecting one or two Broadband Modems to your XC-DPG503.
3. Configuring the XC-DPG503 for Interent Access.
4. Configuring all PCs on your LAN to use the XC-DPG503.
2. Connecting one or two Broadband Modems to your XC-DPG503.
3. Configuring the XC-DPG503 for Interent Access.
4. Configuring all PCs on your LAN to use the XC-DPG503.
Requirements:
• One or two Broadband modems (T1, xDSL, Cable, and Satillite) with an active account from your ISP(s).
• Two standard 10/100BaseT network (UTP) cables with RJ-45 connectors.
• TCP/IP network protocol must be installed on all PCs.
• Two standard 10/100BaseT network (UTP) cables with RJ-45 connectors.
• TCP/IP network protocol must be installed on all PCs.
XC-DPG503
Twin WAN VPN Gateway
Chapter Contents
• Overview
• Procedure
• Procedure
1. Configuring your LAN
2. Connecting Broadband Modems
3. Configuring for Internet Access
4. Configuring your LAN PCs
2. Connecting Broadband Modems
3. Configuring for Internet Access
4. Configuring your LAN PCs
TCP/IP Enabled PCs
Broadband Modems
CAT5 Ethernet Cables
9