Summit ENG. 4358-3412E Benutzerhandbuch
16
17
4
Pull on harness adjustment
strap to tighten harness
snugly.
strap to tighten harness
snugly.
NOTE:
A snug strap
should not allow any slack.
It lies in a relatively
straight line without
sagging. It does not press
on the child’s flesh or push
the child’s body into an
unnatural position.
It lies in a relatively
straight line without
sagging. It does not press
on the child’s flesh or push
the child’s body into an
unnatural position.
WARNING:
Failure to fasten and tighten the harness
system correctly with each use can result in
serious injury or death.
system correctly with each use can result in
serious injury or death.
Position the harness
retainer at mid-chest (even
with arm pits), away from
the child’s neck.
retainer at mid-chest (even
with arm pits), away from
the child’s neck.
5
!
Removing Your Child From the
Child Restraint
Child Restraint
Press on release button
and pull apart. Place
harness over sides of child
restraint. Remove child.
and pull apart. Place
harness over sides of child
restraint. Remove child.
3
1
2
Press red button on
buckle to release the
buckle plates.
buckle to release the
buckle plates.
Loosen harness by pushing
down on the harness
release lever while pulling
out on the harness.
Depending on your model,
the harness release lever
may be under a flap on the
pad in the front of
restraint.
down on the harness
release lever while pulling
out on the harness.
Depending on your model,
the harness release lever
may be under a flap on the
pad in the front of
restraint.
4358-3412E Summit 3/2/07 2:55 PM Page 19