Siemens SIMATIC NET CP 343-1 Benutzerhandbuch
english
10
Product information CP 343–1
C79000–Z8964–C038–05
Note
Read the sections about downloading configuration data to the CP in the
NCM S7 for Industrial Ethernet manual /8/.
NCM S7 for Industrial Ethernet manual /8/.
1.4
Further Information on Operation
Downloading Firmware
The CP 343-1 supports firmware updates using the Firmware Loader.
An update of the firmware can be downloaded from the PC/programming de-
vice at any time. After downloading the firmware, the CPU must be reconfigu-
red (power off/on or memory reset).
vice at any time. After downloading the firmware, the CPU must be reconfigu-
red (power off/on or memory reset).
For more information on downloading the firmware, refer to the README file
of the NCM S7 for Industrial Ethernet configuration software.
of the NCM S7 for Industrial Ethernet configuration software.
Note
Read the information on downloading a database to the CP in the
NCM S7 manual /8/.
NCM S7 manual /8/.
Group status “8183” on the FC call interface
The return values DONE=0; ERROR=1; Status=8183 can be caused by the
following states:
following states:
S
The CP is in the STOP mode.
S
The connection is not configured.
S
The connection is not established