Samsung Car Satellite TV System 8000 Benutzerhandbuch

English

04

Advanced Featur

es

Network Setup (Auto)

Use the Automatic Network Setup when connecting your 
TV to a network that supports DHCP. To set up your TV’s 
wired LAN connection automatically, follow these steps:

How to set up automatically

1.  Connect your TV to your LAN as described in the 

previous section.

2.  Turn on your TV, press the 

MENU

 button on your 

remote, use the  or  button to select Setup, and 
then press the 

ENTER

E button.

3.  Use the  or  button to select Network in the Setup 

menu, and then press the 

ENTER

E button. The 

Network screen appears.

4.  On the Network screen, select Network Type.

5.  Set Network Type to Wired.

6.  Select Network Setup. The Network Setup screen 

appears.

7.  Set Internet Protocol Setup to Auto. 

8. Auto acquires and enters the needed Internet values 

automatically.

9.  Wait two minutes, and then press the 

RETURN

 button 

on your remote. Acquiring an IP address can take  up to 
2 minutes depending on network conditions.

10.  Follow the directions for Manual if the TV does not 

automatically acquire a network connection.

Network Setup (Manual)

Use the Manual Network Setup when connecting your TV to 
a network that requires a Static IP address. 

Getting the Network Connection Values

To get the Network connection values on most Windows 
computers, follow these steps:

1.  Right click the Network icon on the bottom right of the 

screen.

2.  In the pop-up menu that appears, click Status.

3.  On the dialog that appears, click the Support tab.

4.  On the Support Tab, click the Details button. The 

Network connection values are displayed.

How to set up manually

To set up your TV’s cable network connection manually, 
follow these steps: 

1.  Follow Steps 1 through 6 in the “How to set up 

automatically” procedure.

2.  Set Internet Protocol Setup to Manual.

3.  Press the  button on your remote to go to the first 

entry field.

4.  Enter the IP Address, Subnet Mask, Gateway, and 

DNS Server values. Use the number buttons on your 
remote to enter numbers and the arrow buttons to move 
from one entry field to another.

5.  When done, press the 

RETURN

 button on your remote.

6.  Select Network Test to check the Internet connectivity.

^ ??

3

  

  

  

#$‚/ !@?

3

  

  

  

J! ƒ=

3

  

  

  

<#

3$!

<## Q 

3

  

  

  

U Move    E Enter    R Return

^/! / ! !*# !$

3$!



U Move    E Enter    R Return

 !ƒ += 

3„ 



 !ƒ # !$

 !ƒ + ?!

#„_"#>?$/„  ??_/%

3:;;

SWL connect 

‚|j_WWWTuh„iu]_TWY^XYhTW]sWZU•‹‰GGGZX

YWXWTW`TWXGGG㝘㤸GXWa[^aXW