Ricoh IS300e Benutzerhandbuch
Attaching the Control Panel Unit to the Scanner Unit
25
2
Attaching the Control Panel Unit to the
Scanner Unit
Scanner Unit
Note
❒ Use the tool that comes with this
machine when you tighten or loos-
en the screws.
en the screws.
AAAA
Insert the plug of the control pan-
el unit into the socket on the scan-
ner unit, as illustrated below.
el unit into the socket on the scan-
ner unit, as illustrated below.
Important
❒ While making sure that the plug
is facing in the correct direction,
inset the plug as far as it goes
into the socket. It may be a bit
tight to insert the plug into the
socket, so push the plug with a
strength that is enough for in-
serting it in place.
inset the plug as far as it goes
into the socket. It may be a bit
tight to insert the plug into the
socket, so push the plug with a
strength that is enough for in-
serting it in place.
Note
❒ To avoid the plug being insert-
ed in the wrong direction, the
socket has a number of tiny
prongs inside of it. When you
insert the plug into the socket,
make sure that the socket is fac-
ing in the correct direction. In-
serting in the wrong direction
creates the risk of damage to the
plug and the socket.
socket has a number of tiny
prongs inside of it. When you
insert the plug into the socket,
make sure that the socket is fac-
ing in the correct direction. In-
serting in the wrong direction
creates the risk of damage to the
plug and the socket.
❒ Be careful not to pinch the cable
when you attach the control
panel unit to the scanner unit.
panel unit to the scanner unit.
❒ Locating the scanner unit at an
end of a desk makes it easy to
attach the control panel unit.
attach the control panel unit.
BBBB
Insert the hooks of the control
panel unit to the scanner unit.
panel unit to the scanner unit.
CCCC
Secure the control panel unit us-
ing the screw that comes with this
machine.
ing the screw that comes with this
machine.
Note
❒ Do not open the cover located at
the lower left of the control pan-
el. Changing configuration of
the switches inside of the cover
could cause this machine to stop
operating normally.
el. Changing configuration of
the switches inside of the cover
could cause this machine to stop
operating normally.
ABK011S
ZDLp330
ZDLp340