Ricoh IS300e User Manual

Attaching the Control Panel Unit to the Scanner Unit

25

❒ Use the tool that comes with this

machine when you tighten or loos-
en the screws.

AAAA

❒ While making sure that the plug

is facing in the correct direction,
inset the plug as far as it goes
into the socket. It may be a bit
tight to insert the plug into the
socket, so push the plug with a
strength that is enough for in-
serting it in place.

❒ To avoid the plug being insert-

ed in the wrong direction, the
socket has a number of tiny
prongs inside of it. When you
insert the plug into the socket,
make sure that the socket is fac-
ing in the correct direction. In-
serting in the wrong direction
creates the risk of damage to the
plug and the socket.

❒ Be careful not to pinch the cable

when you attach the control
panel unit to the scanner unit.

❒ Locating the scanner unit at an

end of a desk makes it easy to
attach the control panel unit.

BBBB

CCCC

❒ Do not open the cover located at

the lower left of the control pan-
el. Changing configuration of
the switches inside of the cover
could cause this machine to stop
operating normally.

ABK011S

ZDLp330

ZDLp340