Psion Teklogix 9160 G2 Benutzerhandbuch

2.2.3  LAN Installation: Ethernet

The 9160 G2 is a high-performance Access Point that supports 100Mb/s Fast Ether-
net LANs, as well as 10Mb/s, with both full and half duplex operation. It comes 
equipped with: a 10BaseT/100BaseT card (using a category-5 twisted pair cable, an 
RJ-45 connector, running at a rate of 10 or 100Mb/s). For port pinouts, please refer 
to Appendix B: “Port Pinouts And Cable Diagrams”.

2.2.3.1  Ethernet Cabling

The maximum cable segment length allowed between repeaters for the 9160 G2 
(10BaseT/100BaseT Ethernet cabling) is 100 m. 

2.2.4  Status Indicators (LEDs)

The high-performance 9160 G2 has six status indicators on the front of the enclo-
sure, as shown in Figure 2.2 on page 21. The numbered and coloured LEDs on the 
front of the unit indicate the operating status for each port, as described in Table 2.1.

LED

Number

Name

Function

Colour

1

Ethernet link 

Link indicator for 10BaseT/100BaseT: 
ON = good link; OFF = no link

yellow

*

2

Ethernet activity 

Ethernet LAN activity (Rx/Tx)

green

3

1st 802.11 radio status

1st 802.11 radio activity (Rx/Tx)

green

4

2nd 802.11 radio status

2nd 802.11 radio activity (Rx/Tx)

green

5

NB radio status

NB radio activity (Rx/Tx)

green

6

Power

LED On solid = Unit powered
LED Off = No power to unit

green

*

Table 2.1  9160 G2 LED Functions: Front Enclosure