Psion Teklogix 9160 G2 Benutzerhandbuch
Psion Teklogix 9160 G2 Wireless Gateway User Manual
23
Chapter 2: Installation Requirements
Connecting A Video Display Terminal
2.1.5 Connecting A Video Display Terminal
An ANSI compatible video display terminal (e.g., DEC VT220 or higher), or a PC
running terminal emulation, is used for diagnostic purposes.
running terminal emulation, is used for diagnostic purposes.
The terminal is connected to the RS-232 port on the 9160 G2 (see Figure 2.2 on page
21). This port is normally set to operate at 115,200 baud, 8 bits, 1 stop bit, no parity.
To comply with Part 15 of the FCC rules for a Class B computing device, only the
cable supplied (P/N 19387) should be used.
21). This port is normally set to operate at 115,200 baud, 8 bits, 1 stop bit, no parity.
To comply with Part 15 of the FCC rules for a Class B computing device, only the
cable supplied (P/N 19387) should be used.
2.2 Changing The Configuration With A Web Browser
The 9160 G2 Flash memory can be reconfigured remotely via the network using a stan-
dard HTML Web Browser such as MS Internet Explorer (version 4.0 or later) or Fire-
fox. See Chapter 4: “Quick Steps For Setup And Launch” for instructions on
changing the parameters and general configuration settings.
dard HTML Web Browser such as MS Internet Explorer (version 4.0 or later) or Fire-
fox. See Chapter 4: “Quick Steps For Setup And Launch” for instructions on
changing the parameters and general configuration settings.