Psion Teklogix 9160 G2 Benutzerhandbuch
Chapter 4: Quick Steps For Setup And Launch
Configure ‘Basic Settings’ And Start The Wireless Network
Configure ‘Basic Settings’ And Start The Wireless Network
42
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Note:
Currently the 9160 G2 Wireless Gateway menus appear slightly different
from those shown - the menu tabs are arranged vertically down the left
side of the page, rather than across the top.
from those shown - the menu tabs are arranged vertically down the left
side of the page, rather than across the top.
4.5 Configure ‘Basic Settings’ And Start The Wireless
Network
Provide a minimal set of configuration information by defining the basic settings for
your wireless network. These settings are all available on the Basic Settings page of
the Administration Web interface, and are categorized into steps 1-3 on the Web page.
your wireless network. These settings are all available on the Basic Settings page of
the Administration Web interface, and are categorized into steps 1-3 on the Web page.
For a detailed description of these “Basic Settings” and how to properly configure
them, please see Chapter 5: “Configuring Basic Settings”. Summarized briefly
here, the steps are:
them, please see Chapter 5: “Configuring Basic Settings”. Summarized briefly
here, the steps are:
1.
Review Description of this Access Point.
Provide IP addressing information. For more information, see “Review /
Describe The Access Point” on page 48.
Describe The Access Point” on page 48.