Proxim AP-4000 Benutzerhandbuch

CLI Command Types

Syntax:
[Device-Name]>set <parameter name> <parameter value> 

Example:
[Device-Name]> set ipaddr 10.0.0.12

IP Address will be changed when you reboot the Access Point. The CLI reminds you when rebooting is required for a 
change to take effect. To reboot immediately, enter reboot 0 (zero) at the CLI prompt.

Use 0 (zero) as the index to a table when creating an entry. When creating a table row, only the mandatory table elements 
are required (comment is usually an optional table element). For optional table elements, the default value is generally 
applied if you do not specify a value.

Syntax:
[Device-Name]>set <table name> <table index> <element 1> <value 1> …
      <element n> <value n>

Example:
[Device-Name]> set mgmtipaccesstbl 0 ipaddr 10.0.0.10 ipmask 255.255.0.0

A new table entry is created for IP address 10.0.0.10 with a 255.255.0.0 subnet mask.

Use the index to be modified and the table elements you would like to modify. For example, suppose the IP Access Table 
has one entry and you wanted to modify the IP address:

[Device-Name]>set mgmtipaccesstbl 1 ipaddr 10.0.0.11

You can also modify several elements in the table entry. Enter the index number and specific table elements you would 
like to modify. (Hint: Use the search Command to see the elements that belong to the table.)

[Device-Name]>set mgmtipaccesstbl 1 ipaddr 10.0.0.12 ipmask 255.255.255.248 
          cmt “First Row”

The following example illustrates how to manage the second entry in a table.

Syntax:
[Device-Name]>set <Table> index status <enable, disable, delete>
[Device-Name]>set <Table> index status <1=enable, 2=disable, 3=delete>

Example:
[Device-Name]>set mgmtipaccesstbl 2 status enable
[Device-Name]>set mgmtipaccesstbl 2 status disable
[Device-Name]>set mgmtipaccesstbl 2 status delete
[Device-Name]>set mgmtipaccesstbl 2 status 2