Proxim AP-4000 Benutzerhandbuch

Alarms

The Rogue Scan feature provides an additional security level for wireless LAN deployments. Rogue Scan uses the 
selected wireless interface(s) for scanning its coverage area for Access Points and clients.

A centralized Network Manager receives MAC address information from the AP on all wireless clients detected by the AP. 
The Network Manager then queries all wired switches to find out the inbound switch/port of these wireless clients. If the 
switch/port does not have a valid Access Point connected to it as per a pre-configured database, the Network Manager 
proceeds to block that switch/port and prevent the Rogue AP from connecting to the wired network.

CLI Configuration File Execution 
Errors

4

Minor

There is an error in execution of the CLI 
configuration file. The message specifies the 
filename, line number, and error reason.

SSH Initialization Failure

3

Major

One of the following failures occurs:
Keys not present
Keys cannot be generated
Internal error (no available resources)

SSH Key Generation Successful

6

Informational

SSH Key generation is successful.

Wireless Service Shutdown

6

Informational

Wireless service is shutdown.

Wireless Service Resume

6

Informational

Wireless service resumes.

First MIC Report Attack

4

Minor

First MIC report attack is detected.

Second MIC Report Attack

4

Minor

Second MIC report attack is detected.

MIC Attack from Wireless Station 4

Minor

A MIC attack is detected from a wireless station.

SNTP Time Retrieval Failure

4

Minor

SNTP Client in the AP fails to retrieve time 
information from the configured SNTP servers. 
Also included in message: IP Address of SNTP 
server.

SNTP Time Sync-Up Failure

4

Minor

SNTP Client in the AP fails to synchronize the time 
with the SNTP server it was communicating with. 
Also included in message: IP Address of SNTP 
server.

Incompatible license file

3

Major

Incompatible license file is stored in flash memory 
during initialization or license file download.  Also 
included in message: incompatibility reason.

Invalid license file

3

Major

Invalid license file is stored in flash memory during 
initialization or license file download.  The license 
file is found to be invalid if the signed checksum 
verification fails.

Mesh Connection Failure

3

Major

AP fails to connect with an uplink Mesh AP or 
Mesh portal. Also included in message: uplink 
Mesh portal/AP MAC address, Mesh SSID, and 
reason for connection failure.

Link Integrity Failure

3

Major

Link integrity feature determines that link integrity 
target is down. Also included in message: Link 
Integrity target IP address.

Topology Change

6 

Informational

Mesh AP changes its uplink mesh connection. Also 
included in message: uplink Mesh AP/portal MAC 
address and Mesh SSID.