Protec PROTEK II SN Benutzerhandbuch

To change the units of measure from mils to microns, and

vice versa, press the    0N       +     

key.

Each time this combination of keys are pressed the units
will change from one to the other. The unit of measure
indicator, located in the upper right corner of the display,
will also change.

The Counted Average Measurement mode is a special 
feature which permits the user to take a series of 
consecutive measurements ( from 2  to  99 ) which are 
then averaged.

1- Press the 

 key .

    The display will show “CAM  MODE”

2- Press the 

  key. The display will show “CAM  2”

3. Press            or  

key to increase or decrease the

    number of measurements. Once the desired number of 
    measurements is shown on the display (for example: 

    “CAM  7”), press the 

 key. The display will show 

    “-- -- --” and the CAM indicator will be displayed.

NOW, THE GAUGE IS READY TO MEASURE  

  

CONSECUTIVE MEASUREMENTS AND DISPLAY 
THE AVERAGE OF THE  

  READINGS.