Trek TREK-725 Benutzerhandbuch
31
Chapter 4
Figure 4.4: Choose HyperTerminal COM port
4.
Setup HyperTerminal by selecting a Baud Rate of 38400 bps, 8
Data Bits, No Parity, one Stop Bit, and no Flow Control. Press
“OK”.
Data Bits, No Parity, one Stop Bit, and no Flow Control. Press
“OK”.
Figure 4.5: Configure COM port parameters
Now, HyperTerminal is ready to use.
Connect a null modem cable from the PC COM port to the TREK-725
COM1 port.
COM1 port.
See section 1.6 for the location of the TREK-725 COM1 port.
4.2.2 Choosing an image download method
1.
Power on TREK-725.