Panasonic Attune II Bedienungsanleitung

8







 













 Switch  compartment

Do not open the cover of this compartment. It should be 
opened only by qualified service personnel or system 
installers.

 Battery (optional accessory)

Insert a battery for use with this Belt Pack. (Refer to p. 10 
“Battery loading & replacement”.)

 Battery lock [EJECT]

When removing the battery, slide out the lock.
When loading a battery, insert the battery until the lock 
clicks. 
Please note the direction that inserts the battery.

 Microphone input jack

This jack is used for connection with the Panasonic 
WX-CH427 Headset.

 Earphone output jack

This jack is used for connection with the Panasonic 
WX-CH427 Headset.

 Power button [POWER]  

Pressing the button will turn the Belt Pack on.
Pressing the button again for 2 seconds or more will turn 
the Belt Pack off.

 Volume control buttons [VOL + – ]  

Use this button to adjust the volume of the headset’s 
earphone.
Press the [+] button to increase the sound level. Each 
time the button is pressed, a beep notifies the user that 
the volume is being increased. If you try to increase the 
volume over the upper limit, two beeps notify the user of 
a prohibited action.
Press the [–] button to reduce the sound level. Each time 
the button is pressed, a beep notifies the user that the 
volume is being reduced. If you try to reduce the volume 
below the lower limit, two beeps notify the user of a 
prohibited action. 
When the product’s power is turned off and then turned 
back on, the volume will return to the default setting 
(center value).