Panasonic Arbitrator 360 Bedienungsanleitung
18
19
Setup
Factory default values are shown below.
Items officers can set
Setting Item
Factory Default Value
Description
1 Camera1
Color camera connected the [CAMERA 1] connector setting
AE[– -- +]
0
Color camera video brightness setting totally
Setting : -, -1, 0, +1, +
LPR Mode
PATROL
LPR mode setting
Setting : PATROL (normal mode), LPR (License Plate Recognition
mode)
Patrol Shutter Speed
AUTO
Shutter speed setting with [LPR Mode] set to “PATROL”
Setting : AUTO, 1/100, 1/500, 1/1000
Patrol Zoom
×1.0
Zoom ratio setting with [LPR Mode] set to “PATROL”
Setting : ×1.0 - ×.0
LPR Shutter Speed
1/1000
Shutter speed setting with [LPR Mode] set to “LPR”
Setting : AUTO, 1/500, 1/1000
LPR Zoom
×1.0
Zoom ratio setting with [LPR Mode] set to “LPR”
Setting : ×1.0 - ×.0
Audio/Video
Audio and video setting
Image Enhance
OFF
The brightness of a dark video image on the main screen adjustment
Setting: OFF (no enhancing)
LOW (enhancing slightly)
HIGH (enhancing strongly)
VIDEO OUT1
VIDEO OUT
Output to [VIDEO OUT1] connector
Setting: CAM1 (Camera 1)
*
1
CAM (Camera )
*
1
VIDEO OUT (the same signal as that output from the
[VIDEO OUT] connector)
Setup/Info
Setup/Information
Officer
Officer settings
Officer 1 ID
----
Officer 1 ID
Officer 1 Name
----
Officer 1 name
Officer 2 ID
----
Officer 2 ID
Officer 2 Name
----
Officer 2 name
Source
*
----
Source
Area
*
----
Area
Shift
*
----
Shift
Work Time
----
Work Time
Overlay OSD
OFF
Overlay OSD setting
Setting : OFF, AUTO, SIMPLE, DETAILS,
Camera1 Rec LED
ON
Color camera [REC] lamp setting
Setting : ON, OFF
Target Speed
OFF
Target vehicle speed setting
Setting: OFF, 1, , …, 00
*
*
1 CAM1 and CAM may not be displayed, depending on
the settings made on the Video Allocation screen in
Administrator setup.
*
If the Front-End application is connected, the names,
Source, Area, and Shift, may be different from the
corresponding field names of the Front-End application.
The field name of the Front-End application can be
changed using the Back-End application.
*
This may not be selected, depending on the setting made
on the Trigger screen in Administrator setup.