Tone Commander 6210 Benutzerhandbuch

Line and Power Connections

U models are powered on pin 7 (-) and pin 8 (+) of the U IN jack. PS1
and PS2 output power is supplied on the S/T OUT jack to power an
additional terminal.

•

  Using an 8-conductor line cord, connect the U IN jack on the

telephone to the line jack. Route the cord under the guide tabs in
the phone base. An additional terminal may be connected to the S/T
OUT jack.

•

  Connect the network line to the power supply (Tone Commander

Part No. 901042 or equivalent), and the power supply output to the
U IN jack on the phone as shown.

Handset/Headset

•

  Plug the supplied handset or a compatible headset into the jack on

the left side of the telephone.

to Network

Set TE termination

(internal or external)
to 100 ohms.

Set phone termination to 100 ohms.

1900' max.

100

or

100

to Network

or