Technicolor - Thomson ITC251 Benutzerhandbuch
Channel set-up
EN
9
Manual channel set-up
Follow the procedure given on this page if you find that some channels have not been
stored during the initial set-up.This can happen if you are setting up cable network
channels. Setting up channels manually requires every setting for a particular channel to be
entered, one at a time.
stored during the initial set-up.This can happen if you are setting up cable network
channels. Setting up channels manually requires every setting for a particular channel to be
entered, one at a time.
Display the
OVERVIEW
menu by pressing the
MENU
button. Select the
Installation
option and press
OK
to confirm. Select the
Installation
option from the
Install
menu
and press
OK
to confirm.
1.
Select your country using the
buttons. Press
OK
to confirm.The
Connections
screen appears. Press
OK
to continue.The
Installation
menu appears. Select the
Manual installation
option and press
OK
.
Define all the settings in turn for each channel to be stored. Follow the instructions
appearing at the bottom of the screen.
appearing at the bottom of the screen.
2.
Select the
Standard
option. Use the
or
button to select the standard for your
country.
Note: The following standards are available to choose from:
I
for the UK and Ireland,
France
for
France and Luxembourg,
DKK’
for Eastern Europe, the Middle East and Asia,
EURO BG
for
Western Europe, Australia and New Zealand.
3.
Select the
Reception
option. Select the reception method for the channels (aerial or
cable network) using the
or
button.
4.
Select the
Channel search
option. Enter the number of the reception channel or
use the
buttons to find the channels.When a channel has been found the picture
is displayed.
5.
If the picture is not clear you can adjust the setting.You do this by selecting the
Fine
tuning
option and adjusting it with the
buttons.
6.
Select the
Name
option. Place the cursor appears at the first dash. Scroll through the
alphabet using the 1 and 2 buttons. Go to another character using the
buttons.
7.
Then select the
Store on programme
option and enter the number to be
assigned to this channel using the numeric buttons (for instance, for BBC1 type 01).
Press
Press
OK
.
Important: Whenever you change a value in the
Manual install
menu, the
Store on
programme
option starts flashing. To confirm your change you need to select the
Store on
programme
option and press
OK
. If you do not confirm the change it will be cancelled when
you change channels or put the TV set in standby.
Repeat this procedure to find other channels.
Notes:
- For cable networks, to search for missing channels, select
- For cable networks, to search for missing channels, select
Other
instead of a country, then
select
Auto update
in the
Installation
menu.
- If you wish to go through the whole initial set-up process, put the TV in standby mode, then hold
down the
PR
+
and
+
buttons on the television until the menu displays. Proceed as for the
initial set-up.
- Subsequent set-ups:
- The
Auto update
function allows you to set up channels just launched or any channels
that are missing or wrongly set up.
- The
Auto installation
function is used for setting up channels after the initial set-up (e.g.
after moving house).
This process deletes all channels previously stored. To set up a new channel, it is better to use
This process deletes all channels previously stored. To set up a new channel, it is better to use
Auto update
or
Manual installation
.
Return
Standard
I...
Reception
Aerial...
Channel search
CH 01
Fine tuning
Store on programme
01
Name
BBC1
Manual install
Use the
¦
¦
/
keys, or enter the channel number.
itc251-en 2/02/06 11:42 Page 9