National Instruments NI-488.2 Benutzerhandbuch
Chapter 2
Measurement & Automation Explorer
© National Instruments Corporation
2-15
3.
Right-click on your GPIB interface and select NI-488.2 Help from the
drop-down menu that appears.
drop-down menu that appears.
National Instruments GPIB Web Site
To access the National Instruments Web site for GPIB, select
Start»Programs»National Instruments NI-488.2»Explore GPIB to
start Measurement & Automation Explorer. Then, select Help»National
Instruments on the Web»GPIB Home Page.
Start»Programs»National Instruments NI-488.2»Explore GPIB to
start Measurement & Automation Explorer. Then, select Help»National
Instruments on the Web»GPIB Home Page.
View or Change GPIB-ENET Network Settings
(Windows 98/95 Only)
(Windows 98/95 Only)
To view or change the network settings of your GPIB-ENET, refer to the
following sections. For more information about your GPIB-ENET network
settings, refer to the Getting Started with Your GPIB-ENET and the
NI-488.2 Software for Windows 98/95 manual.
following sections. For more information about your GPIB-ENET network
settings, refer to the Getting Started with Your GPIB-ENET and the
NI-488.2 Software for Windows 98/95 manual.
Assign IP Address
You can run the Assign IP Address utility in Measurement & Automation
Explorer, as follows:
Explorer, as follows:
1.
Contact your network administrator to determine whether you should
use the Assign IP Address utility to assign the IP address manually.
use the Assign IP Address utility to assign the IP address manually.
2.
Select Start»Programs»National Instruments NI-488.2»Explore
GPIB to start Measurement & Automation Explorer.
GPIB to start Measurement & Automation Explorer.
3.
Expand the Devices and Interfaces directory by clicking on the + next
to the folder.
to the folder.
4.
Right-click on your GPIB-ENET interface and select Assign IP
Address from the drop-down menu that appears.
Address from the drop-down menu that appears.
To view the built-in, context-sensitive help for the Assign IP Address
utility, click on the Help button.
utility, click on the Help button.
Configure Advanced IP Settings
You can run the Advanced IP Settings utility in Measurement &
Automation Explorer, as follows:
Automation Explorer, as follows:
1.
Contact your network administrator.
2.
Select Start»Programs»National Instruments NI-488.2»Explore
GPIB to start Measurement & Automation Explorer.
GPIB to start Measurement & Automation Explorer.