National Instruments NI-488.2 ユーザーズマニュアル

© National Instruments Corporation

3.

Right-click on your GPIB interface and select NI-488.2 Help from the 
drop-down menu that appears.

To access the National Instruments Web site for GPIB, select 
Start»Programs»National Instruments NI-488.2»Explore GPIB to 
start Measurement & Automation Explorer. Then, select Help»National 
Instruments on the Web»GPIB Home Page.

To view or change the network settings of your GPIB-ENET, refer to the 
following sections. For more information about your GPIB-ENET network 
settings, refer to the Getting Started with Your GPIB-ENET and the 
NI-488.2 Software for Windows 98/95 manual.

You can run the Assign IP Address utility in Measurement & Automation 
Explorer, as follows:

1.

Contact your network administrator to determine whether you should 
use the Assign IP Address utility to assign the IP address manually.

2.

Select Start»Programs»National Instruments NI-488.2»Explore 
GPIB to start Measurement & Automation Explorer.

3.

Expand the Devices and Interfaces directory by clicking on the + next 
to the folder.

4.

Right-click on your GPIB-ENET interface and select Assign IP 
Address from the drop-down menu that appears.

To view the built-in, context-sensitive help for the Assign IP Address 
utility, click on the Help button.

You can run the Advanced IP Settings utility in Measurement & 
Automation Explorer, as follows:

1.

Contact your network administrator.

2.

Select Start»Programs»National Instruments NI-488.2»Explore 
GPIB to start Measurement & Automation Explorer.