Namco Bandai Games Utility Trailer 90500013 Benutzerhandbuch
Page 57
8-1 Compressor Assembly
NOTE:
There are no user serviceable parts on the compressor assembly
.
Under no circumstances should any regulator valve be adjusted.
Altering the regulator valves could lead to serious damage.
Altering the regulator valves could lead to serious damage.
8-2 Replacing the Bike Swing Potentiometer
1.
Remove 4off Security screw (M5x12) and remove the front bearing cover.
2.
Disconnect the connector.
3.
Loosen the grub screw (M4x10) and remove the potentiometer complete
with the mounting bracket.
with the mounting bracket.
4.
Replace the potentiometer taking care to connect the correct wires to the
terminals.
terminals.
5.
Reassemble in reverse order.
6.
Re-initialize the game.
(see section 7 page 54)
Note:
When refitting the potentiometer ensure that the tab on the
potentiometer engages with the hole in the mounting bracket, and that
the grub screw engages on the flat of the potentiometer shaft.
After re-assembly, ensure that the game is re-initialized before
normal game play.
potentiometer engages with the hole in the mounting bracket, and that
the grub screw engages on the flat of the potentiometer shaft.
After re-assembly, ensure that the game is re-initialized before
normal game play.
(see section 7 page 54)