Juniper Networks T1600 Benutzerhandbuch
Figure 7: Removing the Rear Fan Tray
Installing a Rear Fan Tray
The rear fan tray (model number FAN-REAR-TX-T640-S) weighs about 10 pounds
(4.5 kg). To install a replacement rear fan tray, follow this procedure (see
Figure 8 on page 16):
(4.5 kg). To install a replacement rear fan tray, follow this procedure (see
Figure 8 on page 16):
1.
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and
connect the strap to one of the ESD points on the chassis. See “Preventing
Electrostatic Discharge Damage” on page 47.
connect the strap to one of the ESD points on the chassis. See “Preventing
Electrostatic Discharge Damage” on page 47.
2.
Grasp the fan tray by its handles and insert it straight into the chassis.
3.
Tighten the captive screws on the fan tray faceplate to secure it in the chassis,
using a Phillips (+) screwdriver, number 2.
using a Phillips (+) screwdriver, number 2.
Replacing the Rear Fan Tray
■
15
Replacing the Rear Fan Tray