LXE HX2 E-EQ-HX2RG-B Benutzerhandbuch

Bluetooth

 

31

 

E-EQ-HX2RG-B 

 

HX2 Reference Guide 

  

or

  

 

Tap the Bluetooth icon in the taskbar, on the desktop, or in the Control Panel  
to open the LXEZ Pairing application.  

Bluetooth is an option and may not be available on all HX2s. The HX2 default Bluetooth 
hardware setting is On.  

The LXE HX2 Bluetooth

®

 module is designed to Discover and pair with nearby LXE Bluetooth 

devices. Only LXE printers or scanners are recognized and displayed in the Bluetooth panel. All 
other Bluetooth devices are ignored. 

Prerequisite 

The Bluetooth devices (printers and/or scanners) have been setup to allow them 
to be “Discovered” and “Connected/Paired”. The System Administrator is 
familiar with the pairing function of the Bluetooth devices. 

  

 

The Bluetooth remote device should be as close as possible, and in direct line of sight, with the 
HX2 during the pairing process.  

1.  Select Start | Settings | Control Panel | Bluetooth. 
2.  Tap the Settings Tab.  
3.  Change the Computer Friendly Name at the bottom of the Settings display. The Bluetooth 

HX2 default name is determined by the LXE factory installed software version. LXE strongly 
urges assigning every HX2 a unique name (up to 32 characters) before Bluetooth Discovery 
is initiated.    

4.  Check or uncheck the HX2 Bluetooth options on the Settings tab.  
5.  Tap the OK button to save your changes or the X button to discard any changes.