LXE HX2 E-EQ-HX2RG-B Benutzerhandbuch
Bluetooth
33
E-EQ-HX2RG-B
HX2 Reference Guide
Suspend mode, going out of range or being turned off). When disabled, after being enabled, the
HX2 stops searching after 30 minutes. This option draws power from the Main Battery.
HX2 stops searching after 30 minutes. This option draws power from the Main Battery.
Subsequent Use
Note: Taskbar and Bluetooth device Icon states change as Bluetooth devices are discovered,
pair, connect and disconnect. A taskbar Bluetooth icon with a red highlight indicates
Bluetooth is active and not paired with any device. A device icon with a red background
indicates a disconnected paired device.
Bluetooth is active and not paired with any device. A device icon with a red background
indicates a disconnected paired device.
1. Tap the Bluetooth icon in the taskbar to open the LXEZ Pairing application. Tap the
Bluetooth Devices tab, if necessary.
2. Tap the Discover button. When the Bluetooth
®
module begins searching for in-range
Bluetooth devices, the button name changes to Stop. Tap the Stop button to cancel the
Discover function at any time.
Discover function at any time.
3. Any discovered devices are listed in the Bluetooth Devices window.
4. Doubletap a Bluetooth device in the Discovered window to open the Bluetooth device
4. Doubletap a Bluetooth device in the Discovered window to open the Bluetooth device
properties menu.
5. Tap Pair as Scanner to set up the HX2 to receive scanner data.
6. Tap Pair as Printer to set up the HX2 to send data to the printer.
7. If paired, tap Disconnect to stop pairing with the device. Tap Delete to remove the device
6. Tap Pair as Printer to set up the HX2 to send data to the printer.
7. If paired, tap Disconnect to stop pairing with the device. Tap Delete to remove the device
name and data from the HX2 Bluetooth Devices list. Tap OK.
8. Upon successful pairing, the selected device may react to indicate a successful connection.
The reaction may be an audio signal from the device, flashing LED on the device, or a dialog
box is placed on the HX2 display.
box is placed on the HX2 display.
9. Whenever the HX2 returns from Suspend Mode, all previously paired, live, Bluetooth devices
in the vicinity are paired, one at a time, with the HX2.
If the devices cannot connect to the HX2 before the re-connect timeout time period expires
(default is approximately 30 minutes for each paired device) there is no indication of the
continuing disconnect state if Report Failure to Reconnect is disabled.
(default is approximately 30 minutes for each paired device) there is no indication of the
continuing disconnect state if Report Failure to Reconnect is disabled.
Note:
The Bluetooth printer port is COM9.
See Also: Chapter 3 – System Configuration, section titled Bluetooth.