LXE HX2 E-EQ-HX2RG-B Benutzerhandbuch
34
Bluetooth
HX2 Reference Guide
E-EQ-HX2RG-B
Bluetooth Devices
Assumption
: The System Administrator has Discovered and Paired targeted Bluetooth devices
for each HX2. The System Administrator has also enabled / disabled Bluetooth
settings and assigned a Computer Friendly Name for each HX2. See Chapter 3
System Configuration, Bluetooth control panel applet and supported Bluetooth
printers and scanners.
settings and assigned a Computer Friendly Name for each HX2. See Chapter 3
System Configuration, Bluetooth control panel applet and supported Bluetooth
printers and scanners.
The Bluetooth taskbar Icon state and Bluetooth LED states change as Bluetooth devices are
discovered, pair, connect, and disconnect. The Bluetooth LED is located next to the Right Arrow
key on the keypad.
discovered, pair, connect, and disconnect. The Bluetooth LED is located next to the Right Arrow
key on the keypad.
The Bluetooth LED blinks slowly when it is idle. Blinks quickly when the HX2 is discovering
other Bluetooth devices. And blinks normally when it is connected. There may be audible or
visual signals from paired devices as they re-connect with the HX2. Only LXE printers or
scanners are recognized and displayed in the Bluetooth panel. All other Bluetooth devices are
ignored.
other Bluetooth devices. And blinks normally when it is connected. There may be audible or
visual signals from paired devices as they re-connect with the HX2. Only LXE printers or
scanners are recognized and displayed in the Bluetooth panel. All other Bluetooth devices are
ignored.
Taskbar Icon Legend
Bluetooth
®
module is connected to one or more of the targeted Bluetooth
device(s).
HX2 is not connected to any Bluetooth device.
HX2 is ready to connect with any Bluetooth device.
HX2 is out of range of all paired Bluetooth device(s). Connection is
inactive.
HX2 is ready to connect with any Bluetooth device.
HX2 is out of range of all paired Bluetooth device(s). Connection is
inactive.
Blue - Blinking Slowly
Bluetooth is active but not connected to a
device.
device.
Blue – Blinking Medium
Bluetooth is paired and connected to a
device.
device.
Blue - Blinking Fast
Bluetooth is discovering other Bluetooth
devices.
devices.
Bluetooth
LED
LED
Off
Bluetooth hardware has been turned off or
does not exist in the HX2.
does not exist in the HX2.
Note:
When an active paired device, not the HX2, enters Suspend Mode, is turned Off or leaves
the HX2 Bluetooth range, the Bluetooth connection between the linked device and the
HX2 is lost. There may be audible or visual signals as paired devices disconnect from the
HX2. The Bluetooth remote device should be as close as possible, in direct line of sight,
with the HX2 during the pairing process.
the HX2 Bluetooth range, the Bluetooth connection between the linked device and the
HX2 is lost. There may be audible or visual signals as paired devices disconnect from the
HX2. The Bluetooth remote device should be as close as possible, in direct line of sight,
with the HX2 during the pairing process.
See Accessories for supported Bluetooth printers and scanners.
AppLock, if installed, does not stop the end-user from using Bluetooth application, nor does it
stop authorized Bluetooth-enabled devices from pairing with the HX2 while AppLock is in
control. See Chapter 6 – AppLock for more information.
stop authorized Bluetooth-enabled devices from pairing with the HX2 while AppLock is in
control. See Chapter 6 – AppLock for more information.
See Also: Chapter 3 – System Configuration, section titled Bluetooth.