Luma Comfort Fan MF24B Benutzerhandbuch
3
Step 2: Connecting the Back Panel
a. Refer to diagram 2. Find the rectangular panel located on the back of the stand pole. Remove
this back panel from the stand pole by completely unscrewing it from the stand pole. Set it aside.
b. Locate the water pump. This is packaged separately from the stand pole and can be found in box
#1. You will see 2 water hoses (1 large and 1 small) and 1 electric wire connected to the water
pump. Thread the hoses and wire into hole A (smaller, circular hole) and up the stand pole
through hole B (larger, elliptical shaped hole).
pump. Thread the hoses and wire into hole A (smaller, circular hole) and up the stand pole
through hole B (larger, elliptical shaped hole).
c. Locate the back panel removed in step 1 and orient it so that the label with the fan speeds is
located on top of the dial.
d. Take the small water hose from hole B and locate the connector that is attached to the back
panel. Connect the small water hose to the lower valve opening on the connector.