Luma Comfort Fan MF24B Benutzerhandbuch
5
Step 4: Connecting the Fan Head to the Stand Pole
a. Refer to diagram 4. Place the stand pole/base on a level surface.
b. Take the water hoses and electric wire from the fan head/pipe and thread them through the top of
b. Take the water hoses and electric wire from the fan head/pipe and thread them through the top of
the stand pole. Do not attach the fan head to the stand pole yet.
c. Connect the male and female connector plugs together.
d. Take the small water hose from the fan head/metal pipe and connect it to the other valve opening
d. Take the small water hose from the fan head/metal pipe and connect it to the other valve opening
attached to the back panel.
e. Locate the large water hose from the fan head/metal pipe and connect it to the large connector
with the quick release valve.
f.
Attach the fan head/metal pipe onto the stand pole and thread all hoses and wires into the stand
pole through hole B (elliptical shaped hole on the stand pole). Make sure none of the hoses or
wires are bent.
pole through hole B (elliptical shaped hole on the stand pole). Make sure none of the hoses or
wires are bent.
g. Reattach the screws onto the back panel.
h. Tighten the bolts located on the sleeve by the back panel to secure the stand pole and fan
h. Tighten the bolts located on the sleeve by the back panel to secure the stand pole and fan
head/pipe together.