Luma Comfort Fan MF24B Benutzerhandbuch
7
Operating Instructions
1. This misting fan can operate with optimal output in temperatures up to 104°F.
2. Lift up the tank cover and fill the tank with clean water.
3. Connect the fan to a power supply.
4. Turn on the fan by pressing the red power switch.
5. This misting fan has 3 different fan speeds. Turn the speed dial to adjust the fan speed.
6. To start the misting function, press the misting button located on the stand pole. The misting
2. Lift up the tank cover and fill the tank with clean water.
3. Connect the fan to a power supply.
4. Turn on the fan by pressing the red power switch.
5. This misting fan has 3 different fan speeds. Turn the speed dial to adjust the fan speed.
6. To start the misting function, press the misting button located on the stand pole. The misting
function will only work if the fan speed is set. The pump and misting plate should power on at this
time.
time.
7. To adjust the misting volume, turn the misting switch dial located near the top of the fan head.
8. To turn on the oscillation function, press the oscillation switch located on the back of the fan
8. To turn on the oscillation function, press the oscillation switch located on the back of the fan
motor.
9. The maximum run time for a full tank on high speed is approximately 4 hours.
Maintenance
Regular cleaning and maintenance is an essential step in maintaining the longevity of your misting fan
and ensuring that it operates free of defects. Maintain your misting fan by following these steps:
and ensuring that it operates free of defects. Maintain your misting fan by following these steps:
Always unplug the misting fan from the power supply before servicing or cleaning.
Use a soft cloth and a mild soap and warm water solution to clean the fan’s exterior. Do not use
harsh cleaners, gasoline, paint thinner, benzene, etc., as these substances can damage the
misting fan.
harsh cleaners, gasoline, paint thinner, benzene, etc., as these substances can damage the
misting fan.
Thoroughly dry all of the
fan’s parts with a soft cloth before reconnecting the unit to the power
supply.
Drain the water tank after the misting fan has been in use. Regular, scheduled cleaning of the
water tank and misting plate before each use is also recommended.
water tank and misting plate before each use is also recommended.
To clean the water tank, open the tank cover, remove the pump and then remove the tank from
the base. Always remember to remove the pump before cleaning the water tank.
the base. Always remember to remove the pump before cleaning the water tank.
If the misting fan will not be in use for an extended period of time, cover the unit and keep it
stored in a clean, dry place.
stored in a clean, dry place.