Epson PowerLite 1705c Benutzerhandbuch

2. Make sure you’re trying to connect to the right network. In 

Windows, verify that you’ve enabled your computer’s connection 
to the access point or that your wireless card or adapter is enabled, 
and that its SSID matches the projector’s ESSID. In Mac OS X, 
check the AirPort status menu (click the AirPort icon on your 
menu bar) to make sure AirPort is turned on and the projector’s 
ESSID or your AirPort network is selected. 

3. Make sure you aren’t projecting one of the EasyMP configuration 

screens. (You should see a message that the projector is ready to 
connect.) If you have to exit a configuration screen, restart NS 
Connection.

4. Make sure the ESSID for your projector matches the SSID for 

your wireless card, adapter, or access point. If you have an AirPort 
base station, make sure the projector’s ESSID matches the AirPort 
network name. Remember that the ESSID is case-sensitive.

5. Check the IP address for both your projector and your wireless 

card, adapter, access point, or AirPort base station. The first three 
segments of the IP address should be identical. The last segment 
of the projector’s IP address should be close, but not identical, to 
the last segment of the IP address for your wireless interface, 
access point, or base station.

6. Restart your computer and start NS Connection again.

7. If you still don’t see your projector, follow the instructions in 

“Connecting in Advanced Connection Mode” on page 77 to 
connect to the projector. 

From the control bar, you can access these NS Connection features: 

Displays the Select target projector dialog box.

Stops projection of computer images while connecting to the 
projector. 

The projector projects the computer image.

Pauses projection of computer images. Click again to restart 
projection.

Configure

Show All Settings