Epson PowerLite 1705c Benutzerhandbuch

2. Enter the IP address or the projector name for the projector you 

want to connect to, and click 

OK

.

The Projector is added to the EMP NS Connection screen.

If the search fails to find a projector with the specified IP address, 
the searching icon turns into a question mark. If this happens, run 
EasyMP on your projector (see page 48) to check the projector’s 
IP address, then repeat this step.

3. Click the projector you want to connect to and click the 

Connect

 

button. If more than one projector is listed, you can select 
additional projectors and connect to them at the same time.

4. If you are prompted for a keyword, enter the four-digit number 

displayed on the EasyMP Network screen and click 

OK

.

The computer’s image is transmitted to the projector and appears 
on the screen. See page 75 for details about using the floating 
control bar on your computer desktop. 

The projector includes the following network security options which 
you can enable for network projection: 

■

Data encryption
Encode and transmit data. Even if data is intercepted, it cannot be 
deciphered. See page 79 to enable encryption. 

■

Connection limitation (Authentication)
A user’s name and a password are registered in advance, which 
means that only the registered wireless port can connect to the 
network and prevents unauthorized third parties from connecting to 
the network.