Enviro EA800 Benutzerhandbuch

To verify the RF signal strength received by the EA800 perform the following procedure:

If the remote sensor transmitter you are verifying is battery powered, it may take up to 30 seconds for the base unit 

to receive a transmission from the remote sensor.

The base unit displays an approximation of signal strength as indicated by the 

number of filled boxes on the screen as shown at right.

Note: The date and time shown at the bottom of the 

PERFORMANCE screen is the 

time stamp of the last received transmission.

Ensure that at least 2 

Signal Strength bars are displayed as shown at right. If not, it is 

recommended that the sensor be relocated until at least 2 bars are achieved. More 

bars reduces sensor alarm latency, reduces the probability of communication 

alarms, and increases battery life.

For additional information on how to improve signal strength, refer to Winland 

application note AN00101.

F3

Unlock the EA800 as shown 
in “Locking and Unlocking 
the EA800” on page 55

To return to SELECT 
SENSOR screen

To return to home screen.