Fagor BMF-200X Benutzerhandbuch

Door racks

2.  Remove the upper cover on the top of 

the refrigerator starting from the right 
side and then remove the upper cover of 
the upper door.

4.  Remove the special fl ange  self-tapping 

screws indicated in the image below and 
the upper hinge below. Unplug the earth 
wire indicated below.

Note:  Please hold the upper door by hand 
during step 4 to prevent door from dropping. 

5. Remove the upper door by lifting 

vertically and place it on a smooth 
surface with the panel facing upwards.

 

Remove the handle covers and screw 
hole covers, then remove special self 
tapping screws. Remove the handle and 
switch it to the right side, then install the 
self-tapping screws, handle covers and 
screw hole covers in reverse order from 
which they were removed.

 

Loosen the self-tapping screws, detach 
the stop block and door holder. With the 
handle in place, reinstall the door holder 
and the spare stop block found in the 
plastic bag. Do not use the one you just 
removed, that one must be stored in the 
plastic parts bag.

 

Then remove the corner cover and the 
upper hinge cover. Put all parts into the 
plastic parts bag.

3. Disconnect reed switches shown in 

images 1 and 2. Remove cover on the 
cabinet body shown in image 3.

③Upper cover of upper door

②Upper hinge cover (right)

①Upper cover 

④Corner cover

1

2

3

3

2

1

Special flange self-tapping 
screws

Ea rth wire

①

②

③

1

2

② Special self-tapping screws
③ Handle

① Handle covers

④ Screw hole covers
⑤ Door holder
⑥ Stop block
⑦ Self-tapping screws

2

3

1

upper 
hinge