AstroStart 60Cx Benutzerhandbuch

Some units are equipped with a pre-installed microSD 

card. Other units configured for use in large geographic 

regions (Pacific) require a larger capacity microSD card 

to store enough useful mapping data (not provided).
To install or remove the microSD card:

1.  Remove the battery compartment cover 

from the back of the unit and remove the two 

batteries.

2.  Locate the card tray at the center of the battery 

compartment, and check to be certain the card 

is installed in the tray.

3.  To remove the card, slide the tray cover up, 

then lift it toward you to remove the card from 

the tray. 

4.  To re-insert the card, lay the card in the tray, 

close the tray, and replace the batteries and 

cover when finished.

1.  Lift the weather cover from the USB port on 

the upper back of the unit. It recommended 

that you use the USB port rather than the 

serial connection port for faster data transfer.

2.  Connect the USB cable provided with the unit 

to the USB port on your PC and to the mini-

USB port on the back of the unit.

3.  Follow instructions for selecting and 

downloading maps provided with the 

MapSource map data disk and help file.

USB Port  

(under weather 

cover)

(with battery cover removed)

The microSD card tray 

is located beneath the 

batteries in the battery 

compartment.

Slide the tray cover back to 

OPEN, then lift to remove 

or insert the microSD card.  

Close and slide forward to 

LOCK.

Unlock

Lock

g

ettIng

 s

tArted

 > 

t

rAnsferrIng

 d

AtA

 

to

 

A

 

MIcro

sd c

Ard