AstroStart 60Cx Benutzerhandbuch

Seite von 98
Creating Waypoints Using the Map
You can quickly create a waypoint using the Map 
Page. When you pan the map and move the arrow 
over a map item, you see a highlighted description of 
the item.
To create a waypoint using the Map Page:
1.  On the Map Page, use the 
ROCKER to move 
the pointer to the map item you want to mark 
as a waypoint.
2.  Press and quickly release 
ENTER to capture 
and open the information page for the map 
item. 
3.  Highlight 
Save, and press ENTER.
  If the map item selected contains no 
information, a “No map information at this 
point. Do you want to create a user waypoint 
here?” message appears. Highlight 
Yes, and 
press 
ENTER.
4.  To change any information on the Waypoint 
Page, highlight the appropriate field, and 
press 
ENTER to open the on-screen keypad. 
After entering and confirming your changes, 
highlight 
OK, and press ENTER.
Information page for a 
map point with data
Information page for 
a map point without 
data
Creating a Waypoint Using Coordinates
You can manually enter location coordinates to create 
a waypoint. This method is useful for creating a 
waypoint at a specific latitude/longitude position from 
a chart.
To create a new waypoint by entering 
location coordinates:
1.  Create a new waypoint by pressing 
MARK.
2.  On the Waypoint Page, highlight the 
Location 
field, and press 
ENTER to open the on-screen 
keypad.
GPSMAP 60Cx Owner’s Manual 

b
AsIc
 o
PerAtIon
 > 
c
reAtIng
 w
AyPoInts
 u
sIng
 
the
 M
AP