Aspects LW109B Benutzerhandbuch

- 80 -

Troubleshooting
Check the chart below to find out the problems with your player in daily use, and the solutions to them
recommended here. As long as you do follow the instructions, some simple checks or operation may
help solve the problems, make it resume to normal state.
If serious failures happen to the machine, please leave it for professional technician to inspect and
maintain it.
Protect it from electro-static properly before maintenance, for the loader, the key IC and the laser
generator are easy to apt to electro-static shock.

No power 

Plug the power cord into the power jack tightly; if still no power, 
unplug the cord and try again in 5~ 10 minutes. 

Hardly read a disc 

It is normal to wait 10~20 minutes for the unit to read a disc(about 
30seconds for MP3 disc); . 
The disc is extremely dirty or badly scratched( just replace it with a 
good one); 

The sound-track and subtitle 
language is not what 
selected 

If no audio-track of subtitle recorded at all on a disc, there will be no 
language to hear and see. 

No picture   

Ensure that the unit is properly connected. 
Ensure that AV setting of the TV set match the video output format 
of the unit. 

No sound 

Ensure that the unit is properly connected. 
Ensure that the unit is not in Mute status; 
Setup the audio out pattern correctly (see the Audio Output Setup 
for details.). 

Picture distortion in FF or 
F.R motion 

It is normal when the pictures are a little distorted in F.F or F.R. 
status. 

Main keys (on the remote 
control or the unit) invalid or 
picture/ sound abnormal 

Disconnect the AC power cord and plug it in the socket again in 
5~10 minutes, then turn on the player. 

The remote control fails to 
work 

Make sure the batteries are correctly installed; 
Check whether the batteries are exhausted, if yes, replace them; 
Be sure to handle the remote control within its reasonable range, 

No 4:3/16:3TV Shape 

Choose the identical TV Shape type setup of this unit with the TV 
set being used. 

Can not change angle   

This function depends on software availability. Even if a disc has a 
number of angles recorded, these angles may be recorded, these 
angles may be recorded for specific scenes only.   

Under progressive scan, TV 
set screen flashes 

Check that YPbPr cord is connected with TV set YPbPr input cord 
properly; OSD set up for DVD player or TV set properly: Standard 
scan lines format of TV set is compatible with DVD player.       

Forget password   

While the unit is in the stop mode, enter the setup mode and 888 
for the password 
To unlock parental setting       

No more audio languages or 
subtitles. 

There is only one language available recorded on the disc. So no 
more choices.