Apollo SWING GATE OPERATOR 1500 Benutzerhandbuch
12
PUSH TO OPEN INSTALLATION
Both measurements are
taken from the center of
the hinge.
taken from the center of
the hinge.
11”
6”
Direction of opening
Gate (closed)
Hinge post
Top View
Vertical position of
pivot arm (s)
pivot arm (s)
Pivot arm must
be level
be level
1/2”
Hinge post
Center Line of attachment
point for gate bracket
point for gate bracket
Front View
PIVOT ARM (s) INSTALLATION
STEP 1
Location of
pivot point
pivot point
Rewiring actuator (s)
for push to open
for push to open
Must be re-wired for proper operation
Strip back 6” of black sleeve from connector end of the actuator
cable. Cut and reconnect the white/orange and the red/black
motor wires as shown:
Strip back 6” of black sleeve from connector end of the actuator
cable. Cut and reconnect the white/orange and the red/black
motor wires as shown:
8 Pin Connector (s)
Red
Black
Red
Black
Green
White
Orange
Red
Black
Green
White
Orange
Black
Green
White
Orange
Battery +
Battery -
Battery -
Continue with STEP 2, page 6