AMANO HandPunch 1000 Installationsanweisungen
HandPunch 1000 Installation and Operation Manual
Page 24
Revision 1.2
5.3.2
Erasing the HandPunch Setup and User Database
Perform the following steps to erase both the configuration data and the user database.
1. With system power OFF, set both switches 4 and 5 ON.
2. Turn system power ON and wait 5 seconds.
3. Turn both switches 4 and 5 OFF.
2. Turn system power ON and wait 5 seconds.
3. Turn both switches 4 and 5 OFF.
Before putting the HandPunch into service ensure DIP switches 4 and 5 are both
OFF. If switches 4 and 5 are not off, the next time the HandPunch’s power is cycled
the HandPunch’s memory will be erased.
OFF. If switches 4 and 5 are not off, the next time the HandPunch’s power is cycled
the HandPunch’s memory will be erased.
NOTE