AMANO HandPunch 1000 Installationsanweisungen

HandPunch 1000 Installation and Operation Manual

Page 26

Revision 1.2

Apply power to the HandPunch. The HandPunch’s display lights up, the HandPunch 
beeps almost immediately, and the display flashes the following information.

A series of setup screens appear and after a several second delay the HandPunch’s 
display shows the following information.

Depending upon how the HandPunch is configured, the “- ENTER ID -” string may be 
replaced by a user-programmed string.

If the display remains blank, verify the power connections made to the HandPunch.