AMANO HandPunch 1000 Installationsanweisungen

HandPunch 1000 Installation and Operation Manual

Revision 1.2

Page 27

As the HandPunch was designed to be connected to a host computer, generally only 
those commands not addressed by the Time and Attendance software need to be set at 
the HandPunch (i.e. Set Address, Set Language). All other commands should be set 
via the Time and Attendance software. A summary of all the commands and command 
menus is given in Table 3.

To control access to the command menus, each menu has a unique password. This 
password is requested as a part of the process for accessing each menu. A supervisor 
must enter the correct password for that menu to access that menu. The default menu 
passwords are given in Table 3.

To increase the security of the HandPunch, Recognition Systems recommends 
changing the passwords for the command menus to new numbers. These password 
numbers can be up to 10 digits long. This is done at the host computer via the Time 
and Attendance software package. Please refer to the Time and Attendance software 
Users Guide or Manual for information on how to change the passwords.

A second method for controlling access to the command menus is through the use of 
Authority Levels. Authority Levels control whether or not a user may access 
command menus.

•

Level 0 is assigned to users who do not need access to any of the command menus.

•

Level 5 is assigned to supervisors who need access to all command menus.

Password 1

Password 2

Password 3

Password 4

Password 5

Calibrate

Set Language

List Users

Add Employee

Special Enroll

Status Display

Set Date Format

Set User Data

Add Supervisor

Set Time & Date

Remove User

Set Address

Set ID Length

Set Serial

Upgrade