Alvarion BreezeMAX Wi and BreezeACCESS Wi 214486 Benutzerhandbuch
166
Operation
Chapter 5 - Command Line Interface
5.7
System Clock Commands
These commands are used to configure SNTP and system clock settings on the AP.
5.7.1
sntp-server ip
This command sets the IP address of the servers to which SNTP time requests are
issued. Use the this command with no arguments to clear all time servers from
the current list.
issued. Use the this command with no arguments to clear all time servers from
the current list.
Syntax
sntp-server ip <1 | 2> <ip>
• 1 - First time server.
• 2 - Second time server.
• ip - IP address of an time server (NTP or SNTP).
• 2 - Second time server.
• ip - IP address of an time server (NTP or SNTP).
Table 5-8: System Clock Commands
Command
Function
Mode
Page
sntp-server ip
Specifies one or more time servers
GC
sntp-server enable
Accepts time from the specified time servers
GC
sntp-server date-time
Manually sets the system date and time
GC
sntp-server
daylight-saving
Sets the start and end dates for daylight savings time
GC
sntp-server timezone
Sets the time zone for the AP’s internal clock
GC
show sntp
Shows current SNTP configuration settings
Exec