Alvarion BreezeMAX Wi and BreezeACCESS Wi 214486 Benutzerhandbuch

Wireless Security Commands

BreezeMAX Wi² and BreezeACCESS Wi² System Manual 

237

5.20.2 encryption 

This command enables data encryption for wireless communications. Use the no 
form to disable data encryption.

encryption
no encryption

disabled

Interface Configuration (Wireless-VAP)

• Wired Equivalent Privacy (WEP) is implemented in this device to prevent unauthorized access to 

your wireless network. For more secure data transmissions, enable encryption with this 
command, and set at least one static WEP key with the key command. 

• The WEP settings must be the same on each client in your wireless network.
• Note that WEP protects data transmitted between wireless nodes, but does not protect any 

transmissions over your wired network or over the Internet.

• You must enable data encryption in order to enable all types of encryption (WEP, TKIP, and 

AES-CCMP) in the AP. 

5.20.3 key 

This command sets the keys used for WEP encryption. Use the no form to delete a 
configured key.

key <index> <size> <type> <value>
no key index

• index - Key index. (Range: 1-4)
• size - Key size. (Options: 64, 128, or 152 bits)
• type - Input format. (Options: ASCII, HEX)
• value - The key string.

- For 64-bit keys, use 5 alphanumeric characters or 10 hexadecimal digits.

Enterprise AP(if-wireless g: VAP[0])#auth shared-key

Enterprise AP(if-wireless g)#

Enterprise AP(if-wireless g: VAP[0])#encryption

Enterprise AP(if-wireless g)#