Alvarion BreezeMAX Wi and BreezeACCESS Wi 214486 Benutzerhandbuch

 

250

Operation

Chapter 5 - Command Line Interface

5.24

WMM Commands

The AP implements QoS using the WiFi Multimedia (WMM) standard. Using 
WMM, the AP is able to prioritize traffic and optimize performance when multiple 
applications compete for wireless network bandwidth at the same time. WMM 
employs techniques that are a subset of the developing IEEE 802.11e QoS 
standard and it enables the AP to inter-operate with both WMM- enabled clients 
and other devices that may lack any WMM functionality.

The WMM commands supported by the AP are listed below. 

5.24.1 wmm

This command sets the WMM operational mode on the AP. Use the no form to 
disable WMM.

[no] wmm <supported | required> 

• supported - WMM will be used for any associated device that supports this feature. Devices that 

do not support this feature may still associate with the AP. 

• required - WMM must be supported on any device trying to associated with the AP. Devices that 

do not support this feature will not be allowed to associate with the AP. 

supported

Interface Configuration (Wireless)

5.24.2 wmm-acknowledge-policy

This command allows the acknowledgement wait time to be enabled or disabled 
for each Access Category (AC).

wmm

Sets the WMM operational mode on the AP

IC-W

wmm-acknowledge- 

policy

Allows the acknowledgement wait time to be enabled or 

disabled for each Access Category (AC)

IC-W

wmmparam 

Configures detailed WMM parameters that apply to the AP 

(AP) or the wireless clients (BSS)

IC-W

Enterprise AP(if-wireless g)#wmm required

Enterprise AP(if-wireless g)#