Alfa Romeo 147 Benutzeranleitung
IN AN EMERGENCY
231
IMPORTANT For versions with Sele-
speed transmission, make sure that the
gears are in neutral (
gears are in neutral (
N) (checking that the
car moves if pushed) and then proceed as
for towing a normal car with mechanical
transmission, following the instructions giv-
en previously.
for towing a normal car with mechanical
transmission, following the instructions giv-
en previously.
Should it be impossible to set the gears to
neutral, do not tow the car and contact Al-
fa Romeo Authorised Services.
fa Romeo Authorised Services.
USING THE JACK
See paragraph “In the event of a punc-
ture” in this chapter.
Please be informed that:
– lthe jack mass is approx. 2.100 kg;
– the jack requires no adjustment;
– the jack cannot be repaired and in the
event of a fault it must be replaced by an-
other original one;
other original one;
– no tool other than its crancking device
may be fitted on the jack.
IF THE CAR IS TO BE
LIFTED
LIFTED
Do not start the engine
when towing the car.
when towing the car.
WARNING
The purpose of the jack is
only for replacing wheels
only for replacing wheels
on the car with which it is provid-
ed or on cars of the same model. It
must never be used for other pur-
poses such as for example raising
cars of other models. In no case
must it be used for repairs under
the car.
ed or on cars of the same model. It
must never be used for other pur-
poses such as for example raising
cars of other models. In no case
must it be used for repairs under
the car.
WARNING
The car may fall if the jack
is not positioned correctly.
is not positioned correctly.
Never use the jack for higher ca-
pacities than the one stated on the
label.
pacities than the one stated on the
label.
WARNING
USING AN ARM LIFT OR
WORKSHOP LIFT
WORKSHOP LIFT
The car should be lifted only at the side
setting the ends of the arms of the work-
shop lift in the area shown in
shop lift in the area shown in
fig. 54-55.
fig. 54
A0A1085m
197-233_Alfa147 Q2 GB 4-07-2008 12:04 Pagina 231