Bosch 2000 Benutzerhandbuch
2000 Series | Program Entry Guide | 4.0
Receiver
EN | 19
Bosch Security Systems | 7/05 | 35114F
3 Non-Fire Group
Default:
0
Selection: 0 to 9, B to F
1 to 8
Non-Fire alarm from Points 1 to 24.
9 or 0
Non-Fire alarm from key A, B, or C.
Refer to Section
Refer to Section
7.0
ABC Keys.
There are no Pulse Format versions of
the Modem II Alarm recent Close,
Alarm Cross Point, or Exit Alarm
Reports. All occur as Alarm
the Modem II Alarm recent Close,
Alarm Cross Point, or Exit Alarm
Reports. All occur as Alarm
Reports.
The Cross Point feature creates two
point alarms. Refer to Section 11.0 Point
Codes.
point alarms. Refer to Section 11.0 Point
Codes.
4 Pt Trbl Group
Default:
0
Selection: 0 to 9, B to F
1 to 8
Trouble, Missing, Bypass, or Swinger
Bypass Reports from Fire and Non-Fire
points combined.
Bypass Reports from Fire and Non-Fire
points combined.
Multiple trouble conditions can create
duplicate Trouble Reports. For
example, a point can send a trouble for
a open sensor loop, then a trouble for
missing.
duplicate Trouble Reports. For
example, a point can send a trouble for
a open sensor loop, then a trouble for
missing.
5 Restoral Group
Default:
0
Selection: 0 to 9, B to F
1 to 8
Restoral on points 1 to 24, Fire and
Non-Fire combined.
Non-Fire combined.
6 Closing Group
Default:
0
Selection: 0 to 9, B to F
0
Closing Report when a passcode is not
required to turn system on (refer to
required to turn system on (refer to
Passcode
Rquired
prompt in Section
15.0 Passcodes) or a keyswitch is used.
1 to 8
Closing Report with User ID for users 1
to 8.
to 8.
7 Opening Group
Default:
0
Selection: 0 to 9, B to F
0
Opening Report when keyswitch is
used, or Part On No Delay, or Part On
with delay.
used, or Part On No Delay, or Part On
with delay.
1 to 8
Opening Report with User ID for users
1 to 8.
1 to 8.
8 Cancel Group
Default:
0
Selection: 0 to 9, B to F
0
Cancel Report when keyswitch is used.
1 to 8
Cancel Report with User ID for users 1
to 8.
to 8.
9 Sys Trbl Group
Default:
0
Selection: 0 to 9, B to F
1
Reports an unsuccessful attempt to connect a
remote programmer.
remote programmer.
2
Reports an unsuccessful attempt to connect a
remote programmer.
remote programmer.
3
The system automatically reset. Call Bosch
Security Systems if reports persist.
Security Systems if reports persist.
4 Not
used.
5 Not
used.
6
Reports missing battery.
7
Reports low battery.
8
No AC power to system. Control panel is
running on battery.
running on battery.
9
Communication Failure event for Phone 1.
B
Communication Failure event for Phone 2.
C
RF tamper (points or receiver).
D
RF low battery.
E
RF receiver 7 trouble.
F
RF receiver 8 trouble.